Quality assessment of residential buildings due to traffic accidents includes the following basic steps: Verifying the scene condition; Collect relevant information; Invite a specialized appraisal unit; Prepare inspection reports; Take legal steps for compensation and insurance; Handling and repairing damage. Below is a detailed article where SVG Engineering shares a specific residential project whose damage was assessed by us after an incident caused by a concrete car colliding with the house. We invite readers to refer to it:
CONSTRUCTION QUALITY INSPECTION DUE TO CONCRETE CAR COLLIDE INTO RESIDENTIAL HOUSE
- Investor: Mr. Dang Van Duyen
- Construction project: Construction quality inspection due to concrete car collide into residential house
- Address: Kien Thuy District, Hai Phong city, Viet Nam
- Inspection Unit: Sao Viet Construction Design Consulting and Inspection Joint Stock Company (SVG Engineering)
- Year of implementation: 2024
SVG Engineering inspected a residential house due to an incident where a car collided with the house
Image of a concrete car colliding into a house, causing damage
CONTENTS OF CONSTRUCTION QUALITY INSPECTION DUE TO CONCRETE CAR COLLIDE INTO RESIDENTIAL HOUSE
- Immediately after receiving the Decision to request appraisal, SVG Engineering SVG quote and signed the contract. Required content: Identify cracks and damage caused by traffic accidents where concrete cars collide; Estimated compensation costs to overcome damages affecting the quality of the current state of Mr. Dang Van Duyen's housing project.
- Observe, mark, and measure cracks and broken walls.
- Use a basic steel ruler to measure the structure, combined with a laser machine to measure the tilt of the house.
- Use a bouncing gun to check the concrete strength of reinforced concrete structures (If necessary).
- Use an ultrasonic steel machine to check steel diameter and quantity of reinforcement (If necessary).
- SVG Engineering's Judicial Inspection unit performed all content of inspection work on site in accordance with the construction inspection outline in the presence of relevant parties.
- This helps to have reference documents to determine the level of impact if there is an incident where a car crashes into a residential house.
- SVG Engineering construction engineers use measuring equipment such as crack gauges and displacement determination devices to find the cause of cracks and breaks caused by traffic accidents.
- Cracks are carefully observed, meticulously measured, numbered and photographed to be included in the construction inspection report and damage cost estimates.
- Determine the severity of the cracks: deep, shallow, or just surface cracks. Cracks and breaks can affect the durability and safety of residential structures.
- Determine the tilt of the house and its severity affecting the safety of the house structure.
- Inspect additional damages such as ground subsidence, wall deformation, or damage to mechanical and electrical systems.
- Prepare a detailed report on the actual status of cracks, settlements, tilts, causes and extent of damage. This report will help determine the level of responsibility of the parties.
- Based on the inspection report, SVG Engineering estimates the cost of damage, thereby offering a reasonable compensation level or repair plan.
IMAGES OF CONSTRUCTION QUALITY INSPECTION DUE TO CONCRETE CAR COLLIDE INTO RESIDENTIAL HOUSE
SVG Engineering inspects the quality of residential houses caused by traffic accident
SVG Engineering conducts measurements of car collision locations
SVG Engineering visually observes and uses a crack gauge
SVG Engineering uses steel rulers to measure damaged walls and structures
SVG Engineering uses a laser ruler to measure the tilt of the house's load-bearing structure
SVG Engineering observed in detail and specifically all surrounding locations affected
SVG Engineering uses an indoor foundation crack gauge
Crack and breakage locations were meticulously measured and photographed by SVG Engineering
SVG ENGINEERING IS A PRESTIGIOUS HOUSE INSPECTION UNIT WITH A BRAND OF 20 YEARS
Sao Viet construction design consulting and inspection joint stock company (SVG Engineering) is a reputable unit with a brand name of 20 years in the field of construction inspection with headquarters in the city. Hai Phong and 2 representative offices in Hanoi and City. Ho Chi Minh. The prestigious SVG Engineering brand is trusted, assured and satisfied by many Investors and Customers when delivering inspection projects from simple to complex. We confidently affirm that we will provide solutions to fix the problem of cracked residential buildings, resolve disputes according to the law and provide the most reasonable compensation for damages to our customers.
EXPENSE OF CONSTRUCTION INSPECTION FOR HOUSE CONSTRUCTION COST IN VIETNAM
Please immediately contact Hotline: 0902.593.686 (Mr. Thang) & Email: svg.engineer@gmail.com for support and advice on issues related to Construction inspection for house construction cost in Viet Nam ... Best regards!
VietNam construction consulting - Mr. Thang 0902.593.686
CONTACT US:
SAO VIET CONSTRUCTION DESIGN CONSULTING AND INSPECTION JOINT STOCK COMPANY
🏢 Hai Phong Office :
SVG Building, Bui Vien Street, Le Chan District
☎ Tel: (0225) 3.747.819
📞 Hotline: 0902.593.686
📧 Email: svg.engineer@gmail.com & svg.group2005@gmail.com
🌎 VietNam Website: giamsatcongtrinh.com
🌎 English Website: en.giamsatcongtrinh.com
🌎 China Website: cn.giamsatcongtrinh.com
Youtube Channel: https://www.youtube.com/@svgengineering
🏢 Representative offices:
1, Ha Noi: No. 9, Alley 81 Hoang Cau Street, Dong Da District
2, Ho Chi Minh: 2/1C Cao Thang Street, 05 Ward, 3 District