QUALITY INSPECTION OF CAT BI PLAZA COMMERCIAL CENTER

19/11/2026 | 8 views

In the management, operation, and renovation of construction works, existing building quality inspection plays an important role in evaluating the performance of structural systems, determining their load-bearing safety, and providing a technical basis for developing appropriate renovation plans. Particularly for commercial buildings that are already in operation, inspecting and assessing structural quality before carrying out upgrading, renovation, or additional equipment installation works is essential.

QUALITY INSPECTION OF CAT BI PLAZA COMMERCIAL CENTER

  • Project: Cat Bi Plaza Commercial Center
  • Location: Le Hong Phong Street, Ngo Quyen Ward, Hai Phong City, Vietnam.
  • Investor: Urban Development Investment and Trading One Member Limited Liability Company.
  • Inspection Unit: Sao Viet Construction Design Consulting and Inspection Joint stock Company (SVG Engineering)
  • Year of Implementation: 2026

SCOPE OF QUALITY INSPECTION OF CAT BI PLAZA COMMERCIAL CENTER

1. Preparatory Work

  • Conduct a preliminary site survey; collect, investigate, and analyze relevant information and documents relating to the project to be surveyed and inspected.

  • Prepare the inspection proposal and submit it to the Investor for review and approval.

2. Existing Condition Survey and Structural Quality Inspection

  • Carry out as-built measurements and prepare drawings of the existing conditions to determine the structural layout of the building.

  • Conduct a detailed survey of the existing structural conditions, including foundation structures (without excavation), columns, beams, reinforced concrete slabs, external enclosure walls, and other structural components.

  • Inspect, photograph, and document any defects or damage identified during the survey, if any.

  • Conduct the following tests and inspections:

    • Determine the compressive strength of concrete using a combination of ultrasonic testing equipment and a rebound hammer.

    • Test the compressive strength of masonry bricks.

    • Inspect the diameter of reinforcing steel bars embedded in reinforced concrete structural members on site.

    • Check the thickness of the concrete cover protecting reinforcement in one reinforced concrete beam or column on site.

    • Determine concrete compressive strength through core sampling and laboratory testing.

3. Structural Analysis and Condition Assessment

  • Based on the collected documents and survey data, conduct an analysis and assessment of the building's existing structural condition and quality.
  • The assessment results are classified into four grades: A, B, C, and D, in accordance with Vietnamese Standard TCVN 9381:2012 – Guidelines for Assessing the Degree of Structural Danger in Buildings, in conjunction with the Structural Safety Assessment Procedure for Residential Buildings and Public Works No. 08/2015/HĐ-DA1511 issued by the Vietnam Institute for Building Science and Technology (IBST), Ministry of Construction.

4. Structural Analysis and Design Calculations for the Rooftop Solar Power System and Fourth-Floor Renovation

  • Based on the design drawings of the rooftop solar power system (supermarket block), structural design calculations for the fourth-floor renovation (main building block), the project's geotechnical investigation report, as-built construction drawings provided by the Investor, and the results of the structural quality inspection, the Inspection Consultant shall perform structural calculations to assess the load-bearing capacity and safety of the foundations, columns, beams, and slabs during the proposed renovation works.
  • Structural analysis and calculations are performed using ETABS software.

5. Preparation of Structural Quality Inspection Report and Structural Design Calculation Report for Building Renovation

The quality of services performed by Party B must satisfy the requirements of Party A and comply with applicable legal and technical requirements, including the Law on Construction, Decree No. 207/2026/ND-CP dated June 15, 2026, and Circular No. 33/2026/TT-BXD dated June 25, 2026, as well as all applicable national technical regulations, standards, and current State regulations.

SVG ENGINEERING – A TRUSTED CONSTRUCTION QUALITY INSPECTION CONSULTANT IN HAI PHONG

With more than 20 years of experience in construction consultancy, inspection, and assessment, Sao Viet Construction Design and Inspection Joint Stock Company (SVG Engineering) is a professional provider of construction quality inspection services in Hai Phong and many other provinces and cities throughout Vietnam.

SVG Engineering has a team of qualified and experienced engineers and specialists, supported by a comprehensive range of inspection and testing equipment to carry out site surveys, existing condition assessments, and structural inspections of buildings.

All inspection activities are carried out in accordance with established technical procedures and comply with applicable standards and regulations, ensuring that assessment results are scientifically based and highly reliable.

Through each project, SVG Engineering aims to deliver inspection solutions tailored to the actual conditions and specific characteristics of each building. These solutions help investors determine construction quality, structural load-bearing capacity, and overall safety, providing a reliable technical basis for informed decisions regarding the management, operation, and renovation of construction works.

COST OF CONSTRUCTION INSPECTION IN VIETNAM

Please immediately contact Hotline: 0902.593.686 (Mr. Thang) & Email: svg.engineer@gmail.com for support and advice on issues related to Construction Inspection in Viet Nam ... Best regards! 


VietNam construction consulting - Mr. Thang 0902.593.686

CONTACT US:

SAO VIET CONSTRUCTION DESIGN CONSULTING AND INSPECTION JOINT STOCK COMPANY

🏢 Hai Phong Office :

Address : 7th floor SVG Building - Bui Vien Street - An Bien Ward - Hai Phong City
☎ Tel: (0225) 3.747.819
📞 Hotline: 0902.593.686
📧 Email: svg.engineer@gmail.com

🌎 VietNam Website: giamsatcongtrinh.com 
🌎 English Website: en.giamsatcongtrinh.com
🌎 China Website: cn.giamsatcongtrinh.com

 Youtube Channel: https://www.youtube.com/@svgengineering

🏢 Representative offices:

  • Ha Noi  Branch Office : No. 9/ 81 Hoang Cau Street, Dong Da Ward, Hanoi Capital
  • Ho Chi Minh Branch Office: 2/1C Cao Thang Street, Ban Co Ward, Ho Chi Minh City
  • Hue Branch Office : M25 Lot , 21 Street, Dong Nam Thuy An, Thanh Thuy Ward, Hue City